If you have accidentally cracked or damaged your iPhone 8 Plus screen, you may be worried about the cost of getting it repaired. However, with a little bit of effort and the right tools, you can actually replace the screen yourself for no cost at all. Here’s how:

1. Gather the necessary tools: To replace your iPhone 8 Plus screen, you will need a pentalobe screwdriver, a suction cup, a spudger tool, tweezers, and a replacement screen. You can find these tools online or at a local electronics store.

2. Power off your iPhone: Before you begin any repairs, make sure your iPhone is completely powered off. This will prevent any accidental damage to the device.

3. Remove the screws: Use the pentalobe screwdriver to remove the two screws located on the bottom edge of the device, next to the charging port.

4. Separate the screen: Place the suction cup over the Home button and gently pull upward. This will create a small gap between the screen and the rest of the device. Insert the spudger tool into the gap and slowly move it around the edges to detach the screen from the adhesive holding it in place. Be careful not to apply too much pressure or you may damage the screen further.

5. Disconnect the cables: Once the screen is loose, carefully lift it up and locate the three cables that connect it to the phone. Use the spudger tool or tweezers to disconnect these cables. Be gentle and take your time to avoid causing any damage.

6. Swap the screens: Take your replacement screen and carefully attach the three cables to the same connectors on the device. Make sure they are securely connected before proceeding.

7. Reattach the screen: Gently lower the new screen back onto the device, starting from the top. Press down firmly to ensure it is properly seated. Then, use the pentalobe screwdriver to put the two screws back in place.

8. Power on your iPhone: Once the screen is securely attached, power on your iPhone to test the new screen. If everything is working properly, you have successfully replaced the screen for $0!